XLZ2-25 Full Automatic Granulated Pharmaceutical Herbs Pelleting Machine Granules Making Machine Small Dry Granulator Machine

      The XLZ2-25 is a dry granulator for experiments developed by our company. This machine is the smallest dry granulator for laboratory research and development. It is suitable for laboratories, intermediate experimental devices and small-scale production. For small batches of samples in research institutes and laboratories. It takes about 50-80 grams of dry powder to achieve its moldability. According to the mechanical extrusion granulation process principle, the prepared dry powder or fine crystal raw materials with a certain amount of crystal water are extruded into flakes, and then the granulation system is passed through the screen to make granules of the required size. The raw materials can be fed into the hopper by hand or vacuum feeder, conveyed and compressed by the vertical feeding screw, and pushed to the bite angle of the two squeezing rollers; the raw materials are squeezed into thin sheets (pressing rollers) by the horizontal pressure rollers. The speed of the roller determines the time that the material stays in the roller nip zone); the pressure required by the material is linearly transmitted to the press roller through the hydraulic device, and the vertical arrangement of the press roller can ensure the consistency of the material density. The machine is easy to assemble, disassemble and clean.
According to different particle size requirements, the mesh size of the screen in the equipment granulation system can be replaced with each other. The powder raw materials are directly made into granular products that meet user requirements without any intermediates and additives. After granulation, the product size is uniform, the bulk density is significantly increased, and fluidity is improved, which not only controls dust flying, but also reduces powder waste. It is convenient for storage and transportation, and can control solubility, porosity and specific surface area. It can be directly used to compress tablets or fill capsules.
It is especially suitable for granulating drugs that cannot be granulated by traditional wet granulation and are unstable under humid and hot conditions. The dry granulation process can replace the pipeline input of wet granulation, save manpower, material resources, and financial resources, and is a new type of energy saving and environmental protection equipment.     

This machine is composed of a feeding mechanism, a tablet pressing mechanism, a hydraulic mechanism, a frame, and an electrical control. The feeding, tablet pressing, and granulation all adopt variable frequency stepless speed regulation, the oil pump pressure is adjustable, and the fineness of the finished product can be changed by different Screen obtained. Improve the granulating cage to increase the yield of granules. The machine is easy to assemble, disassemble and clean. The parts in contact with materials are made of stainless steel. The product meets GMP requirements. The material is added from the top feeding funnel,forced to be squeezed into flakes by two pressing wheels, and then enters the lower granulating chamber. In the granulating chamber, the flake materials are broken by the granulating blade, and then enter the granulating chamber until the particles are less than or equal to Mesh aperture, the particles pass through the mesh screen to the tray. The required particle size can be determined by adjusting the screen size.  

Pharmaceutical industry-manufacturing granules for pharmaceuticals, granules for traditional Chinese medicine, granules forfilling antibiotic capsules, granules for direct antibiotics, granules for animal medicine, powdered dialysis preparations;
Food industry-granules for condiments and spicy seasonings, granules for snack manufacturing, granules for health food;
Chemical industry and others-cosmetics, pesticides, chemical industry drugs, animal feed, detergents.  

Q:How to choose the suitable one?
A:Please tell us your detailed requirements by mail or online, we will recommend the suitable one
as your request.

Q: How long need to ship the machines after order
A: All machines can be ready and shipped in 15 or 30 days after order!

Q:When I receive it after pay?
A: The normal models can be sent out within 7-10 days, please contact us to check shipping time to your address.

Q: What's the payment you prefer?
A: Our standard payment terms are T/T with 30% deposits and balanced before shipment.

Q: Why should you choose our tablet press and packing machine?
A: We are professional in tablet press and packing machine. Our machines have been exported to Asia,USA, EU and Middle East.

Q:Is it will be broken during transport?
A: Please don't worry,our goods are with standard export package.

Q: Can you provide after-sale service?
A: Yes, sure. We have engineers available to service overseas.

Q: What is our advantages?
A: