Introduction The hose, composite hose potting machine is mainly used for the principle of one transmission. Using Japanese Panasonic sensors and other electrical components to control, changing the old models of pneumatic control components easy to wear lamp drawbacks. Using the sheave indexing mechanism to drive the turntable equipped with the fixture to perform intermittent movement, it can complete a series of functions such as automatic filling, internal and external heating, end sealing, code pressing, edge trimming, and finished product exit. The filling measurement is accurate, the heating time is stable and adjustable, and the appearance of the end sealing is beautiful, neat, firm and hygienic. Cut edges flat. The machine is set to 8 supply positions, which can automatically complete each process. The whole machine runs smoothly and reliably, without noise and other pollution. All contact materials and some related parts of the whole machine are made of high-quality stainless steel, and quick-change devices are used for parts that need to be cleaned, which is easy to disassemble and wash. When some materials need heating insulation, a heating and constant temperature device can be installed outside the barrel. All materials that use plastic tubes and composite tubes as packaging materials can be assured to use this machine. It is an excellent product for chemical pigments, cosmetics industry, pharmaceutical industry, adhesive industry, shoe polish industry and other related industries.
The machine is independently researched and developed, and the system is upgraded regularly to improve the machine, so that the operation is more stable, durable, efficient and easier to operate. Main features and technical reference parameters:• The transmission part is enclosed under the platform, which is safe, reliable and pollution-free. • The filling and sealing part is installed above the platform, which is easy to observe, operate and maintain. •The tube bin is equipped with adjustable speed (also adjustable swing angle) manipulator (can also be equipped with vibrating coil to lower the tube), tube controller and generator to ensure accurate and stable supply of hoses. •The upper tube armrest is rotated about 90º under the mechanical action, and the hose is pressed into the elastic tube cup of the upper tube workstation. • Photoelectric alignment workstation, using high-precision color mark detectors, stepper motors, etc. to control the hose pattern in the correct position. •Filling nozzles determine their specifications according to the characteristics and quantity of the filling materials. The nozzles that can be provided include blow-off type, cut-off type and blow-cut integrated type. •With photoelectric detection device, it can be filled without tube. •Press and form the printing code station, the robot automatically seals and prints the code on the position required by the process.
